UL KG-9000
UL KG 9000 is a two-component aliphatic polyaspartic-polyurea spray coating that is UV stable. It is designed for use as a topcoat for polyurea and polyurethane systems on properly prepared substrates or as a stand-alone coating. It is environmentally friendly, with excellent color, gloss retention, and UV stability.
Technical Data
- Application Equipment: Plural component equipment with material heat control. Both the Isocyanate “A” Side and Resin “B” Side must be heated to 160°F. Apply with flat spray tips.
- Mix Ratio: 1:1 by volume
- Gel Time: 45 seconds
Physical Properties
- Chip Resistance: Rated 10, No Failures (ASTM D3170)
- Elongation: 92% (ASTM D412)
- Hardness: 52 Shore D (ASTM D2240)
- UV Weathering: Delta E <2.0 @ 3000 hrs (ASTM G154)
- Taber Abrasion: 14 mg loss/1000 cycles (ASTM D4060)
- Tensile Strength: 1,700 psi (ASTM D412)
- Flammability: PASS (FMVSS 302)
Key Certifications
Complies with FDA and USDA Coating Regulations for Incidental Food Contact Applications (Keller and Heckman LLP Letter of Opinion).
Recommended Applications
Suitable as a topcoat for polyurea and polyurethane systems or as a stand-alone coating. Applicable to aluminum, galvanized steel, and fiberglass with proper preparation.
Packaging
- 10-gallon set: 5 gallons Part-A (Isocyanate side) and 5 gallons Part-B (Resin side)
More From the Portfolio
Explore the Full Portfolio
Browse every Ultimate Linings coating system, filterable by product type.
View Portfolio
